Air-cooled Brushless 400W Motor Driver 48V
 |
Κωδικός προϊόντος: 12-0425
Βάρος: 0.37 Kg
Μονάδα Μέτρησης: τμχ
Οι τιμές δεν περιλαμβάνουν ΦΠΑ (24%)
Διαθεσιμότητα (15-30 days)
Show shipping cost estimation
Βάρος: 0.37 Kg
Μονάδα Μέτρησης: τμχ
€ 108,00
Οι τιμές δεν περιλαμβάνουν ΦΠΑ (24%)
Διαθεσιμότητα (15-30 days) Show shipping cost estimation
Περιγραφή
| Air-cooled Brushless 400W Motor Driver 48V | |||
|
• Closed-loop steady speed when a large load speed of the motor can maintain
• Pure hardware design,high speed,high ability of anti-interference • External potentiometer control,analog voltage0-5V and PWM Governor(controlled by MACH3) • Positive inversion control,soft switching function • Over current circuit protection and warning red light • With EN Enable control |
|||
|
Operating voltage: 12-52VDC
Power: ≤500W
Rated Current: 10A
Peak Current: 15A
Closed circuit assures the steady speed
External Potensiometer Control: 0-5V analog
PWM Speed Control (MACH3)
Gross Weight: 370gr
Size: 150mm x 89mm x 40mm
|
DC+ DC- DC Input voltage DC12-52V
U V W Motor phase line
HALL+ Holzer Power Anode HA HB HC Holzer Power Signal line HALL- Holzer Power Cathode +5V Control Signal Power +5V VR Speed control signal input GND The control signal source Common port F/R Forward / reverse control signal terminal PWM PWM Frequency MACH3 EN Enable control input |
||
|
Air-Cooled Brushless 400W Spindle Motor (not included)
|
|||
|
Collet: 3.175mm
Operating voltage: 12-48VDC
Power: 400W
Speed: 3000-12000RPM
Torque: 530mN.m
Insulation resistance: > 2 megohm
Dielectric strength: 400V
Diameter: 57mm
Motor total length: 172mm
The spindle runout of: about 0.01-0.03.
Αλλα προϊόντα
| |||
